FLEXtra PROFIBUS profiPoint w 90deg Connector product number=700-972-1XA02

FLEXtra PROFIBUS profiPoint Set – incl. PROFIBUS 90° Connector

It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.

Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.

With Siemens part 6ES7972-0DA00-0AA0 now EOL, many teams face supply gaps. The Flextra PROFIBUS profiPoint provides a drop-in solution—tested, supported, and no redesign costs.

An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.

This set contains the PROFIBUS connector, 90° diagnosis with PG interface with the proven screw terminal required for connection to the PROFIBUS cable.

• Power supply independent of the bus participants
• Device-independent bus termination due to a separate power supply
• Suitable for use as an active measurement point
• Supply of active PROFIBUS components (compact repeater, NETLink, PROFIBUS diagnostic connector)
• incl. PROFIBUS connector 90° screw terminal diagnosis with PG interface (700-972-7BB12)

Installation and mounting instructions.

Technical Specifications

• Dimensions (D x W x H) 35 x 32 x 72 mm
• Weight Approx. 85 g
• Segment connection PROFIBUS connectors
• Voltage supply 24 V DC, 18…30 V DC
• Output voltage per segment DC 24 V/5 V DC
• Electrical isolation 500 V
• Current draw Max. 400 mA

Ready to replace Siemens 6ES7972-0DA00-0AA?