Diagnosis TAP IE 100

The TAP IE 100 enables recording of Ethernet communications at 10 or 100 Mbps without retroactive effect. The Ethernet transmission via the Line RJ45 sockets is sent out on the two monitor sockets as a “copy”. With a PC or other diagnostic device the Ethernet telegrams can be logged and analyzed, e.g. with “Wireshark”. The practical flat design with the intelligent arrangement of the network connections saves space in the control cabinet.

• Non-reactive recording of Ethernet communication
• Secure and passive decoupling of telegrams
• Monitors all OSI layers starting from layer 2 and mirrors packets of all sizes and types and VLAN traffic
• For 10 or 100Mbit/s
• No influence on Ethernet transmission in case of power failure

The network line is looped through the TAP IE 100 without feedback (“LINE 1” / “LINE 2”). The monitor RJ45 socket (“MON 1/”MON 2”) sends the data out separately from the communication partners. The transmission between the two communication partners works even if the TAP IE 100 is not supplied with voltage or if no cables are connected to the monitoring sockets. Connecting or disconnecting the monitoring cables or the diagnostic device has no effect on the communication via the LINE sockets.

You can find for other Helmholz products here.