FLEXtra PROFINET-Switch 16-Port, managed, 10/100/1000Mbps
$ 1,751.20
- PROFINET Conformance Class B (100 Mbps)
- Integration into the automation network with GSDML file
- Fast and easy configuration and diagnostics via PROFINET and web interface
- LLDP, DCP, diagnostic alarms
- Media redundancy: MRP client
- SNMP, VLAN, Cos/QoS mapping, NTP, port mirroring
- Network statistics (frames, errors)
- SD memory card for configuration
- Redundant power supply
- Practical design for optimized cable routes
- 16-port Ethernet with up to 1000 Mbps
16-Port, managed, 10/100/1000Mbps
The FLEXtra PROFINET-Switch connects the control world with PROFINET according to Conformance Class B and the IT world with up to 1GBit Ethernet.
The managed FLEXtra PROFINET switch 16 port can be used to network PROFINET components with 100 Mbps as well as Ethernet nodes with up to 1000 Mbps. Thus, communication from the control level and the machine or the mixing of Ethernet and PROFINET components in one switch is possible. PROFINET prioritization according to Conformance Class B of the machine components is always guaranteed.
One of the most important functions of a PROFINET switch is the prioritization of PROFINET telegram traffic in the machine network. The managed switch can distinguish whether the telegram is a web request, an FTP file transfer, a media stream, or a PROFINET telegram. In the event of a high transmission load, the important telegrams can thus be prioritized to prevent telegram losses of the machine components. The supported PROFINET protocols, such as LLDP, DCP or diagnostic alarms, can be easily parameterized and managed.
In addition to PROFINET, functions such as SNMP, NTP, VLAN, port mirroring, QoS/CoS mapping and extensive statistics are available for managing the Ethernet network. If required, the configuration can be saved on an SD card or loaded for commissioning.
The practical design with the intelligent arrangement of the Ethernet sockets saves space in the control cabinet. The status LEDs on the top of the FLEXtra PROFINET switch, which are always clearly visible, allow for easy diagnostics even when fully wired.
In addition, the FLEXtra PROFINET switch supports port control via inputs and port status indication via outputs. Bits in the PROFINET-IO image of the switch can be used as inputs and outputs as well as 4 digital inputs and 2 digital outputs with 24V. The assignment and the function of the inputs and outputs can be configured via the GSDML file.
Technical advantages when using a PROFINET-Switch
- Prioritizing of PROFINET frames
- Assignment of a configuration via the device name
- Neighborhood detection
- Device exchange without programming device
- Ring redundancy
- Each port can be activated or deactivated
- Diagnostic messages for network problems
- Identification and maintenance data
| General information | ||
|---|---|---|
| Order number | 700-855-16P01 | |
| Article name | FLEXtra PROFINET-Switch 16-Port, managed, 10/100/1000Mbps | |
| Scope of delivery | FLEXtra PROFINET-Switch 16-Port with power supply plug | |
| Dimensions (DxWxH) | 78 x 125 x 111 mm | |
| Weight | Approx. 550 g | |
| PROFINET interface | ||
| Number | 16 | |
| Protocol | PROFINET IO Device as defined in IEC 61158-6-10 | |
| Physical layer | Ethernet | |
| Transmission rate | PROFINET: 100 Mbps Ethernet: 10/100/1000 Mbps |
|
| Connection | 16 x RJ45 socket | |
| integrated switch | Yes | |
| Features | PROFINET Conformance Class B Media Redundancy (MRP) automatic addressing (DCP) topology detection (LLDP) diagnostic alarms |
|
| Digitale Ein/Ausg?nge | Inputs: 4, type 3 according to DIN EN 61131-2 Outputs: 2, 500mA 24V DC, with electronic fuse |
|
| Status indicator | 4 LEDs function status, 16 LEDs Ethernet-Status (two-colored) | |
| Voltage supply | 2x DC 24 V, 18 ? 30 V DC, redundant | |
| Current draw | max. 400 mA with DC 24 V | |
| Power dissipation | Max. 9,6 W | |
| Mounting position | Any | |
Related products
ProfiNet
